FJO Racing Products releases it’s standalone Water Injection System. This product is styled after the very popular water injection accessory of FJO 341B System.
The use of water and methanol to control detonation in high compression or boosted engines is a time proven technology. This advanced product is engineered to deliver a fine mist that can be precisely metered based on MAP PSI, TPS, RPM, and Fuel injector duty-cycle. With the use of 1 and 2 dimensional maps, it is possible to program the controller to deliver exactly the correct amount of spray without the risk of flooding the combustion chamber. Our unique nozzle-solenoid design allows for instant control and delivers a mist so fine that complete evaporation is almost instantaneous. This results in a more effective use of the spray without risk of condensation in the intake. The FJO Water Injection system is constructed using materials which are engineered for and unaffected by water and methanol. To avoid compromising the performance of the system, materials such as brass, raw or anodized aluminum, raw or plated steel, natural rubber, and silicone should not be used as they are not suitable for use with water and/or methanol.
Built to the same rugged specifications as all of FJO's products, this system sets a new standard in water injection.
Parts
The following list of parts is only a subset of the complete list found in our price list.
Required Parts |
CWI0010 |
Water Injection Controller
Full 3D mapping controller with RPM, SPPED, TPS, Water Pressure, and Wideband AFR inputs (controller and cable only, includes software)
|
CWP0002 |
Water Injection Pump
High output, high pressure water injection pump 12 Volts, 8 Amps
|
IWI0001 |
Water Injection Installation Kit
Includes high pressure line (black), fittings for CWI0010 /CSV0003 / CWP0002 installation, and pump relay
|
CWN0X00 |
Water Injection Solenoid Nozzle
High speed solenoid valve with precision ultra-fine atomizing nozzle for water injection, 3/8 NPT with 1/4" hose fitting, 316 Stainless Steel (From 300-800HP, see pricelist)
|
Optional Accessories |
FWF0450 |
Water Injection Filter
High pressure, stainless body, sintered stainless filter element, 316 Stainless Steel, compression fittings for 1/4" tube
|
FUT0403 |
Water Injection T-fitting for dual solenoid nozzles
High pressure, 316 Stainless Steel, three compression fittings for 1/4" tube
|
FBT0403 |
Water Injection T-fitting for optional pressure transducer
High pressure, 316 Stainless Steel, two compression fittings for 1/4" tube, one 1/8NPT-Female
|
SHP0200 |
High Pressure Sensor - 200 PSIg
200 PSI-gauge, Laser-welded STAINLESS STEEL package, -40°C to +125°C calibrated, 1/8NPT-27 MALE pressure port, 7/8" HEX, 2.85" overall length
|
 |
KWB3001
Wideband AFR System Controller Kit
Single Channel
Includes single channel controller, 4 foot sensor cable, installation manual, installation kit, and mild steel O2 sensor bung (order SO20003 or SO20004 sensors separately) |
|
KWB3002
Wideband AFR System Controller Kit
Dual Channel
Includes dual channel controller, two 4 foot sensor cables, installation manual, installation kit, and two mild steel O2 sensor bungs (order SO20003 or SO20004 sensors separately) |
| IWC0004 |
Wideband AFR Sensor Controller Installation Kit
FOR WIDEBAND INTEGRATION WITH FJO PRODUCTS & NX MAXIMIZER-II
2 meters (6 feet) long, directly connects WB AFR controller (CWC0003/CWC0004) to supported products |
 |
SO20003
Wideband AFR Sensor (NTK)
(requires a CWC0003 or CWC0004 controller for operation) |
 |
SO20004
Wideband AFR Sensor (Bosch)
(requires a CWC0003 or CWC0004 controller for operation) |
