FJO Racing Products has released its new Wideband Air/Fuel Ratio Analysis
System. This product is similar to the 2nd generation FJO Wideband and
supports the same sensors, however the unit is 60% smaller. The wideband
controllers are designed to be integrated with all current products that
support our wideband, as well as being backwards compatible with most older
systems and products.
Kits |
 |
KWB4000
Mini Wideband AFR Controller Kit
(Single channel – for ECU integration)
Includes mini wideband AFR controller (single channel), wiring harness, and oxygen sensor bung and plug. This is an “AFR only” controller designed for ECU or datalogger integration. Dual analog outputs provide “FJO legacy” and 0.5-4.5 volt linear output curves.
Order SO20003 or SO20004 sensors, sensor cables and other options separately.
The SO20004 sensor has an 18-inch cable and can be used without an extension. The SO20003 sensor has a 6-inch cable and may require the use of an IWS300x extension.
|
 |
KWB4001
Mini Wideband AFR Controller Kit
(Single channel – with RPM input and software)
Includes mini wideband AFR controller (single channel, with RPM input), wiring harness, oxygen sensor bung and plug, a PC serial cable, and software CD. Dual analog outputs provide “FJO legacy” and user configurable output curves.
Order SO20003 or SO20004 sensors, sensor cables and other options separately.
The SO20004 sensor has an 18-inch cable and can be used without an extension. The SO20003 sensor has a 6-inch cable and may require the use of an IWS300x extension.
|
Sensors |
 |
SO20003
Wideband Oxygen Sensor [NTK]
This sensor is for use with the KWB30xx kits, KWB400x kits and the 341B2 Engine Management System.
NOT compatible with earlier controllers using the SO20001 sensor. |
 |
SO20004
Wideband Oxygen Sensor [Bosch]
This sensor is only recommended for applications which do not use leaded race fuel. This sensor is for use with the KWB30xx kits, KWB400x kits and the 341B2 Engine Management System.
NOT compatible with earlier controllers using the SO20001 sensor. |
 |
SO20001
Wideband O2 Sensor (first gen)
This sensor is for use with the CWC0001 or CWC0002 controllers only. |
Accessories |
 |
HSB0001
Oxygen Sensor Bung
A mild steel bung to install an O2 sensor into exhaust [requires welding]. A threaded plug is included for when the sensor is not installed. |
 |
HWB3003
Clamp-on Inductive RPM Pickup
Used to pick up a tach signal from a spark plug wire. An adapter is included for use with KWB3001, KWB3002, and KWB3044 kits. |
Displays |
 |
DWB0001
Wideband AFR display, Red LED
Rectangular 3-digit red LED display (“14.7”)
For use with the KWB3001, KWB3002, and KWB3044 kits only. |
 |
DWB0002
Wideband AFR display, Green LED
Rectangular 3-digit green LED display (“14.7”)
For use with the KWB3001, KWB3002, and KWB3044 kits only. |
 |
DWB0003
Wideband AFR display, 2 1/16" GAUGE
Round 3-digit LED display with a 40 led dot bar graph sweep. Ultrabright LEDs for daytime visibility.
For use with the KWB3001, KWB3002, and KWB3044 kits only. |
|
DWB4001
Wideband AFR display, 2 1/16" GAUGE
Round 3-digit LED display with a 40 led dot bar graph sweep. Ultrabright LEDs for daytime visibility.
For use with the KWB400x kits and 341B2 Engine Management System. |
 |
IWC0002
Wideband AFR Sensor Controller Installation Kit
Includes assembled controller connector, and 6 feet of colour-coded 18AWG wires in "pig tail" form (power and ground only). Pins and wire seals for 2 additional contacts included.
Compatible with the KWB3001, KWB3002, and KWB3044 kits only. |
 |
IWS3004
Wideband AFR Sensor Cable [4 foot]
A 4-foot long, high temperature, shielded cable to connect the WBAFR controller to an O2 sensor. Compatible with KWB3001, KWB3002, KWB3044 kits, and 341B2 Engine Management System. |
|
IWS3008
Wideband AFR Sensor Cable [8 foot]
An 8-foot long, high temperature, shielded cable to connect the WBAFR controller to an O2 sensor. Compatible with KWB3001, KWB3002, KWB3044 kits, and 341B2 Engine Management System. |
|
IWS3012
Wideband AFR Sensor Cable [12 foot]
A 12-foot long, high temperature, shielded cable to connect the WBAFR controller to an O2 sensor. Compatible with KWB3001, KWB3002, KWB3044 kits, and 341B2 Engine Management System. |
 |
IWC0004
Wideband AFR Sensor Integration Kit
A 6-foot long cable harness which directly connects the WBAFR controller to supported products such as the FJO water injection system and NX Maximizer-II. Compatible with the KWB3001, KWB3002, and KWB3044 kits only. |
IBC0001
FJO Digital Data Bus Cable [1 ft.] |
A 1-foot expansion bus cable which connects products via the FJO DIGITAL DATA BUS port. Compatible with the KWB4000, KWB4001, and new products with this feature. Requires one IBT0001. |
IBC0004
FJO Digital Data Bus Cable [4 ft.] |
A 4-foot expansion bus cable which connects products via the FJO DIGITAL DATA BUS port. Compatible with the KWB4000, KWB4001, and new products with this feature. Requires one IBT0001. |
IBC0010
FJO Digital Data Bus Cable [10 ft.] |
A 10-foot expansion bus cable which connects products via the FJO DIGITAL DATA BUS port. Compatible with the KWB4000, KWB4001, and new products with this feature. Requires one IBT0001. |
IBT0001
FJO Digital Data Bus Terminator [pair] |
A pair of terminators which terminates the data bus when 2 or more products are connected via the FJO DIGITAL DATA BUS. Compatible with the KWB4000, KWB4001, and new products with this feature. Requires at least one IBC00xx cable. |
