> Home > Products > Progressive Nitrous Mini-Controller > Downloads
FJO Racing Products is very pleased to offer our Progressive Nitrous Mini-Controller.
The PROGRESSIVE NITROUS MINI-CONTROLLER combines the functions of our 2-STAGE TPS AND RPM WINDOW SWITCH and our HIGH CURRENT SOLENOID DRIVER all into one very compact module. It can progressively drive two channels, each with a 40 amp load capacity (continuous duty). The device also supports low-voltage OEM, V10 or 3 cylinder TACH signals without the need for additional adapters. It works with most OEM throttle position sensors including most drive-by-wire vehicles. This device also includes FJO's "real curve" ramp which allows you to create a progressive curve instead of just a ramp, and the ramp can be either time based or RPM based. All this and only the size of a spark plug box.
The PROGRESSIVE NITROUS MINI-CONTROLLER is built for the racing environment to withstand heat, vibration, dirt and water. It is designed to operate over the temperature range from -40 to +185 degrees Fahrenheit (-40 to +85 degrees Celsius).
Downloads
| PC Software Version 6.0.0 [for GEN-2 model only] Supports Windows Vista, XP and 2000 |
Download |
| UPGRADE Utility for older GEN-2 models that shipped with software not supported with Windows VISTA [Warning: damage to the control unit can result from improper use of this utility. Read the UPGRADE Utility instructions before attempting this] |
Download |
| UPGRADE Utility instructions for converting older GEN-2 models to work with version 6.0.0 Software | Download |
| PC Software Version 5.1.0 [for GEN-2 model only] | Download |
| Controller Firmware (Version 0511) [for GEN-2 model only] NOTE:This firmware requires PC software version 5.0 at a minimum. |
Download |
| Firmware Upgrade Instructions |
Download |
| Installation and User Manual [Revision M] | Download |
GEN-1 Models Current
| PC Software Version 2.0.5 [for GEN-1 model only] | Download |
| Controller Firmware (Version 2.06) [for GEN-1 model only] NOTE:This firmware requires PC software version 2.0 at a minimum. |
Download |
| Installation and User Manual [Revision G] [for GEN-1 model only] | Download |